Separate names with a comma.
How about putting a strip of 1084 or something between the squares before you reweld?
There are lots of conversations about how it changes with heat and moisture, eventually shrinking.
Alpha Knife supply has that nice thin G10 that...
Which one ?
Is it his machine frame that's rusted, or is it just the dust that's caked up and rusting.
I'm of the shim to a hardback and temper practice.
Yes be careful of that.
Of all the drives I"ve looked at, it's 220ac input to to a 180vDC motor
Some screw the knife onto a two x four, so even if it grabs, it throws a wood chunk instead of a sharp blade.
Ask Hubert which drive and where he saw this one
"A KB NEMA 4 DC drive is just under $200 shipped to your door"
the prices I see on KB are higher...
That's a DC Drive and that's a DC motor
The clue on the motor tag is the 180 Armature Volts
A rotor is the rotating part in AC motors,...
You can brush on black sulphurized cutting oil.
Buy it in the plumbing section of home depot for pipe threading....
That's a DC motor and a DC controller
You cannot mix te AC/DC, you cannot use a VFD on a DC motor and vice versa
Have you ever read the...
Mokume Gane: A Comprehensive Study
by Steve Midgett
You can't download it, you have to read it online.
He's trying to sell his very expensive...
If they are otherwise a good quality file, consider getting them sharpened.
Just get knife steel.
Boning is just a keyword. That knife is the last thing I want.
they sort of took a chef shaped and made it look outdoorsy
Think about hand sanding around the edge to match the blade sides in grit and direction.
He Ht's then laps flat, that way the blades going into the cnc mill are flat and not warped which would throw off the measurements and the fit...
Should we just guess which vfd you have ?
Take that model number, download the manual.
yes, there is a jumper inside.