Any thoughts on Manix 2 LW Translucent Blue?

Discussion in 'Spyderco' started by Scott J., Apr 8, 2020.

  1. Scott J.

    Scott J. Basic Member Basic Member

    256
    Jun 8, 2019
    I am considering this knife and had a few questions, any insight would be great.
    1. Thoughts on the BD-1 steel?
    2. Thoughts on the handle material? I'm more used to heavier knives with wood or dymondwood scales and steel liners. I just bought a Buck Sprint with glass filled nylon handles and if you check for blade play the whole dang handles flexes. I'm not a big fan of that.
    3. Is it a USA made knife. The reason I ask is b/c DLT puts a little flag next to the USA models. All the other Manix has the flag but this one. It looks like it say USA on the blade tho.
    I'm getting this for a general, do it all edc.
    Also, I really dig the looks of the Translucent blue.
    Anything else I should know?
    Thanks!!
     
  2. yablanowitz

    yablanowitz

    Apr 14, 2006
    It is made in Golden, CO. The handle is FRCP, which is harder and less flexible than FRN. The steel is Carpenter Steel's version of GIN-1, the steel that Spyderco built their reputation on back in the 80s. It isn't a super steel anymore, but is still pretty decent at the price point. Unless you cut a lot of rocks, it should be fine for day to day chores.

    I've had one for years and I like it a lot, but I'm not a big fan of heavy knives.
     
  3. Scott J.

    Scott J. Basic Member Basic Member

    256
    Jun 8, 2019
    Thanks for the info.
    I'm getting it as an edc b/c all my knives are either too heavy (Benchmade Crooked River, Buck 110) or too small (various Case pocket knives).
     
  4. soc_monki

    soc_monki

    807
    Apr 5, 2019
    The manix lw is a great knife. I sold mine, I never carried or used it, so it went to someone who would. But it was solid, and I wouldn't hesitate to buy another if I needed one.

    The new ones have been upgraded to bd1n steel, which seems much better in the edge retention department than bd1. You should enjoy it!
     
  5. Ajack60

    Ajack60 Platinum Member Platinum Member

    Apr 21, 2013
    Can’t say I’ve read anything bad about any of the steel Spyderco uses. IMO, they do an excellent job with S30V. I just picked up my first Manix 2 and was pleasantly happy with the knife. I’ve been hesitant o get one, finally pulled the trigger and will get another one.
    If you like the translucent blue, why not get it? If you’re going to use the knife, the steel is not going to matter as much as the overall package and the smile it brings to your face when you use it.
     
    Scott J. likes this.
  6. GB940Rookie

    GB940Rookie Gold Member Gold Member

    Apr 19, 2016
    In one word, superb. The Manix 2 is Eric Glesser’s best design so far imo.
    It’s my everyday work knife, camping folder and the one folder I chose over all others to go with me and my wife on our best vacation yet. If the SHTF, this folder comes along for the ride.
    The scales are super lightweight yet very strong. 2.9ozs for a knife of this size, an achievement. The translucent handle looks cool and is definitely a conversation piece.
    The blade Steel is very adequate for the price point. Tough and can be sharpened to a razors edge.
    The only negative I can think of is that it’s a pocket hog, but the light weight seems to make it ok.
    One day it will be the most carried Spyderco I’ve ever owned.
    Don’t think I could suggest a better folder for the money.
    [​IMG]
     
    Last edited: Apr 13, 2020
    GoodBoyCody, TheFactor, Ron L and 2 others like this.
  7. John_0917

    John_0917 Gold Member Gold Member

    Apr 15, 2014
    The new Manix LW models are BD1N now, it’s a significant improvement over BD1. I know for sure the DLC models are switched over, the blue may be by now as well.
     
    razorburn and Scott J. like this.
  8. SteelPanther

    SteelPanther

    62
    Nov 9, 2019
    its a lot of knife for how light it is....I like mine but I like any manix 2
     
    Scott J. likes this.
  9. dannyp

    dannyp Gold Member Gold Member

    Nov 25, 2007
    I don't have any experience with the translucent blue version or that steel, but I like my Manix LW a lot. It was my main edc knife for over a year until I recently decided to customize a Griptilian. The FRCP is fairly rigid, but if I squeeze pretty hard it will flex just a little bit. Never had a concern about it breaking. Only negative things I have to say about it are the closed width makes it a bit of a pocket hog that takes some getting used to and the LW versions are pretty stiff at first. Overall it's a great design that is easy to carry for it's size and the caged ball bearing lock is really solid.
     
    Scott J. likes this.
  10. Scott J.

    Scott J. Basic Member Basic Member

    256
    Jun 8, 2019
    Wow, almost any knife there's always a nay sayer, not for this one tho. I'm sold, just might have to wait for next payday, maybe not tho.... gotta do the math.
     
  11. willc

    willc Gold Member Gold Member

    Aug 13, 2013
    B930A7E4-B890-47FE-90B1-617676BE8F69.jpeg The Manix 2 lightweight is my most carried Spyderco knife.

    I am really looking forward to the Rex45 version.
     
    Scott J. likes this.
  12. DocT

    DocT

    Mar 25, 2012
    That particular Manix 2 lightweight is one of my most used knives. I love it. You can’t go wrong with that choice and even my wife likes the looks.
     
    Scott J. likes this.
  13. HOMER GRIFIN

    HOMER GRIFIN

    184
    Apr 15, 2015
    I had a Manix 2 G 10 for years and never carried it because it was just too heavy. Bought the blue translucent and the black lightweight Of all the Spyderco’s I own it is the most comfortable in hand. You won’t be sorry if you get one(or two)
     
    Scott J. likes this.
  14. GatorFlash1

    GatorFlash1

    May 28, 2012
    Good, reasonably priced knife for EDC,

     
    TheFactor and Scott J. like this.
  15. Sharp Guy

    Sharp Guy Gold Member Gold Member

    Jan 6, 2016
    BD1 Translucent Blue was my first Manix 2 LW. I cut a lot of cardboard with that knife and BD1 is better than a lot of people give it credit for. It's very stainless and aasy to put a great edge on it too. I gave that knife to a friend and he loves it. The new versions with BD1N should be even better.
     
  16. GatorFlash1

    GatorFlash1

    May 28, 2012
    BD1N steel is not to be criticized, IMHO. Spyderco would not be using it if it didn't make a great knife steel.
     
    John_0917 and Scott J. like this.
  17. mitch13

    mitch13 Gold Member Gold Member

    Nov 3, 2004
    1 of my favourite plain edge spydies.

    I wondered how the translucent scales, would hold up, after a couple of years it's held up good.
     
    Last edited: Apr 13, 2020
    Scott J. likes this.
  18. John_0917

    John_0917 Gold Member Gold Member

    Apr 15, 2014
    N is a big step forward from regular BD1, which is a pretty good basic stainless blade steel on its own.
     
    Scott J. likes this.
  19. Scott J.

    Scott J. Basic Member Basic Member

    256
    Jun 8, 2019
    It's still in my shopping cart but I have to hold off for a bit.
    Thanks for all the insights, I appreciate it.
     
    Ajack60 likes this.
  20. John_0917

    John_0917 Gold Member Gold Member

    Apr 15, 2014
    In that case maybe hold off a few weeks and get a SPY27 version?
     
    Scott J. likes this.

Share This Page