Fairly Knives Chat - Check in and say Hi! Post whatever here...

Discussion in 'Daniel Fairly Knives' started by Daniel Fairly Knives, Jun 26, 2011.

Thread Status:
Not open for further replies.
  1. Daniel Fairly Knives

    Daniel Fairly Knives Full Time Knifemaker Moderator Knifemaker / Craftsman / Service Provider

    Jan 9, 2011
    That is great to hear!

    I'm glad you like the look on the chopper! I think an etched/polished finish looks especially nice with the crypto.


    On the sheaths I still recommend storing the knives separate. I even oil stainless! Even with kydex you have to be somewhat careful, I always clean and oil them before storage. The kydex better be bone dry too...
     
  2. sloth357

    sloth357 Platinum m0f0 Platinum Member

    Jan 5, 2011
    shaymanx, I hate you for buying that chopper for $60 on the ex... YOU SLUT... ;] I will be keeping an eye on your from now one *_+
     
  3. fast14riot

    fast14riot

    Oct 27, 2010
    Morning guys. Just got done tracking down the scum that hacked my account...

    Thursday, June 14, 2012 12:40:24 PM GMT
    IP Address: 187.115.74.70
    Location: Brasília, Brazilian Federal District, Brazil

    Maybe take note of the IP address, send a firestorm, man in the middle, cack-worm, trojan, or any other computer related calamity you can! thankfully, the account wasn't tied to any bank accounts with any money in them, so far so good. My security setup did stop it before complete access was gained, but I was sure pissed off when I couldn't log in from my android, which is where I do 99% of my on line stuff. On the PC now still cleaning up the mess, reassigning my android to this account, updating passwords, updating secondary notification email addresses, all the good stuff!

    Ok, back to it now. I'll check in later...


    -Xander
     
  4. shaymanx

    shaymanx Gold Member Gold Member

    444
    Jan 25, 2012
    Dumb luck really. I just happened to be looking around when I saw the listing pop up and it was only a few minutes old. I expected to see it gone already, even within the few minutes before I saw it. I usually see that kind of deal after it is looooooooooong gone.

    BTW, I've also seen you score some good stuff. I got my eye on you too!
     
  5. Daniel Fairly Knives

    Daniel Fairly Knives Full Time Knifemaker Moderator Knifemaker / Craftsman / Service Provider

    Jan 9, 2011
    Just dropping in... big rush here!

    I'm about to go pick my wife up from the airport and then her parents are driving in from LA and will be here this afternoon.. oh the timing.

    I haven't written everybody back from yesterday, I do apologize. No time here trying to get everything ready.

    I do have the current batch completely heat treated, I spent a half day yesterday grinding the flats on 5 of them and only have a bit left for that part now! (flats take forever... I went through 2 new belts and 4 old ones on the M4 knives alone! that M4 is INSANE!)

    OK See you guys tonight or tomorrow!
     
  6. bigcountry1315

    bigcountry1315

    Aug 3, 2009
    Evening men.Well she finally arrived. Let me say my Sioux Warrior Survival Knife is out of this world.It is exactly what i was thinking of when I ordered it!!!The pictures do not even come close to a good representation of how awesome this knife is. The sheath that Sara and Daniel made for it is unbelievable.This knife will always be with me when I go in the woods!!!! This is going to be my go to knife!!!!I own a lot of customs in this size range and this one from Daniel is off the charts! It is like a 2lb straight razor!!! Thanks again Brother!!!!
     
  7. fast14riot

    fast14riot

    Oct 27, 2010
    Morning men! Got my knives yesterday maybe 15 minutes before I had to go to work and am at work now, so I have had any real chance to play with them yet.

    BUT THEY ARE SO FRIGGIN SWEET!!! :D :D

    Thanx again Daniel for all the little tid bits and extras you threw in, too. I will make good use of it! I already have one idea that will be fun! I started going over that tanto for some ideas and I have a few I'm going to think about a bit more.

    The rigger will work perfect! It is so comfy in hand, it just wants to cut! I almost carried it to work today, too!


    -Xander
     
  8. bigcountry1315

    bigcountry1315

    Aug 3, 2009
    Morning men.
     
  9. shaymanx

    shaymanx Gold Member Gold Member

    444
    Jan 25, 2012
    Good morning everyone!
     
  10. Daniel Fairly Knives

    Daniel Fairly Knives Full Time Knifemaker Moderator Knifemaker / Craftsman / Service Provider

    Jan 9, 2011
    Awesome stuff guys!

    Just dropping by, spending time with family. Everyone have a great day!!!!!
     
  11. flatblackcapo

    flatblackcapo Part time maker, very very part time Knifemaker / Craftsman / Service Provider

    Mar 25, 2012
    looks like everyone is receiving thier fairly knives . I am jealous of all of you :D I'll start saving for the next run. Danial,have a nice visit with the family. Xander,I will be by soon. have a good one everyone! later.
     
  12. IMWILSON

    IMWILSON Gold Member Gold Member

    May 20, 2011
    Evening everyone, I'm off work till June 25th. WOOOOOHOOOO!!!!
     
  13. shaymanx

    shaymanx Gold Member Gold Member

    444
    Jan 25, 2012
    Morning men! And Happy Father's Day!
     
  14. bigcountry1315

    bigcountry1315

    Aug 3, 2009
    Evening men.Been a busy day.
     
  15. shaymanx

    shaymanx Gold Member Gold Member

    444
    Jan 25, 2012
    Morning men. Have a great day!
     
  16. Daniel Fairly Knives

    Daniel Fairly Knives Full Time Knifemaker Moderator Knifemaker / Craftsman / Service Provider

    Jan 9, 2011
    Hey guys!

    My in-laws just left, we all had a great time. I am ready to go after a nice break.

    I'm going to grind the flats on the 52100 knives then cut up some scale material, the run is back on! :D
     
  17. bigcountry1315

    bigcountry1315

    Aug 3, 2009
    Morning men.Daniel glad you had a good visit.
     
  18. fast14riot

    fast14riot

    Oct 27, 2010
    Hey guys, been busy the last couple days here. Finally getting a chance to work on my mini this morning before I go to work. I finalized the handle and guard, did some buffing, and it still needs to be sharpened. I added a small lip to the top of the guard, it just looks way better and more like a big fighter than a bowie. All the specs nd a few pics are in the mini KITH thread, but here's one for you guys...

    1/10 scale recurve long fighter
    2.1" oal .029" at the ricasso
    Forged W1, bronze, walrus ivory

    [​IMG]


    -Xander
     
  19. Daniel Fairly Knives

    Daniel Fairly Knives Full Time Knifemaker Moderator Knifemaker / Craftsman / Service Provider

    Jan 9, 2011
    Wow! Xander that is seriously impressive!

    2.1" that is super small! That is a proper mini, nice work.
     
  20. Lolaralph

    Lolaralph

    61
    Mar 16, 2012
    Hello Daniel,
    First post here, I really like the tantos (A2), are these something that you produce fairly regularly, I really have to pick one up, unfortunately the PayPal account looks pretty dismal for the next week or so, if the two you have up go, will there be more soon? These have to be some of the nicest knives I have seen for a while, just the right mix of practical with flash.
     
Thread Status:
Not open for further replies.

Share This Page