1. Despite 2020 presenting more than its share of challenges, I'm thankful for all of you, and the community you guys have created. Hope that your homes are full of happiness, your fridge well stocked with leftovers, and your homes warm & loving.

Spyderco milled clips now available!

Discussion in 'Razor Edge Knives' started by razor-edge-knives, Aug 24, 2019.

  1. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    REK designed Spyderco milled, 3D clips are now available at the below listed dealers! You can check out the finishes in this video.

    MORE PICS HERE

    These should fit the following models:

    Para 2/3, Manix 2, Manix XL, Gayle Bradley 1/2, Native Chief*, Native 5*, Delica*, Endura*, Endela*, Stretch*, Domino, Dice, Lum Tanto, Navaja, Vollaton, Lil’ Vollaton, Szabo, Police 3/4*, Police LW*, Ulize*, Advocate, Smock, Caribbean and Amalgam, and the Buck 110/112 Slim Select/Pro
    … *will block lanyard hole
    … Also note that this clip may push against a protruding pivot screw in the tip down carry position


    Just got the sample in, can't wait to do a run of these in the next 2 weeks or so!

    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]
     
    Last edited: Dec 9, 2019
  2. Fullflat

    Fullflat Gold Member Gold Member

    Jan 4, 2018
    Yes! That’s a damn fine looking clip. Smooth, snag free, and machined very nicely. That’d be a huge upgrade for any PM2 or Para3
     
  3. Sharp & Fiery

    Sharp & Fiery Always Embellish Knifemaker / Craftsman / Service Provider

    May 14, 2012
    Love this!! You are on fire!!
    Great job!
     
  4. Ajack60

    Ajack60 Platinum Member Platinum Member

    Apr 21, 2013
    Where do I sign up for one ?????
     
    91bravo and Fullflat like this.
  5. Edgeoflife

    Edgeoflife Gold Member Gold Member

    Oct 11, 2018
    Looks great! how's the springiness? I'm Diggin that acid stone wash blade finish too!
     
    woodysone, 91bravo and Fullflat like this.
  6. JJ_Colt45

    JJ_Colt45 Gold Member Gold Member

    Sep 11, 2014
    I like the design ... it looks good ... but the only Spyderco I actually carry is my Manix IIs and my Native G10 ... I might start carrying a Military as someone was good enough to send me one to try before I bought one ... so maybe I'll need one sometime ? :thumbsup:

    it's just the tip down only that has kept a Military out of my personal knives ... but I am going to give one a try at least ... a friend I met on the forums ... @91bravo was kind enough to send me his M4 Military ... tempting me with one of my favorite steels in Spyderco knives.
     
  7. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    No sign ups... they will be released through a couple online retailers in the near future. When that happens I'll make an announcement :)

    it's a really good balance of springiness and pocket retention as well as being low profile. I'm excited about it!

    Dude.... you should know well enough by now that if you need a pocket clip moved so you can carry that military to tip up I can knock that out for ya :)

    yeah I'm not sure what hole pattern the manix 2/native have. At some point in the near future I'll also make a similar clip for the paysan/nirvana so between those 2 holes these clips should fit a bunch of models.
     
  8. JJ_Colt45

    JJ_Colt45 Gold Member Gold Member

    Sep 11, 2014
    well I have stayed away from the Military because of a bad experience with tip down carry ...

    but I have to admit this M4 Millie that 91bravo sent me is pretty sweet ... love the blade and I lean towards the bigger knives ...

    hopefully I can use it tomorrow and see what it's like ... but between the M4 and the size it's a damn fine knife!

    If I can't get past the tip down carry I may take you up on the clip switch ... that might make the Millie kick a Hinderer out of my pocket now and then.
     
  9. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    ok the official order has started, product is ordered and on the way to the machine shop! excited about this for sure. I hope it opens up a lot of doors to make other custom clips on popular knives, including hinderers :)

    if anyone knows what other spyderco knives have the same hole pattern, please post it up here for me!

    [​IMG]
     
  10. fewpop

    fewpop Gold Member Gold Member

    Nov 18, 2004
    Great stuff Josh! I expect the volume of demand for the 3 hole clips would likely be much more than the demand for some other Spyderco clips, but I sure would like to have one of your clips for my Spyderco Drunken if you ever decide to offer that option. :thumbsup::thumbsup:

    ps - the edges you put on my large CRK Insingo & my Slysz Bowie were stellar...no surprise to those of us that know your work.
     
  11. ScooterG

    ScooterG You mean Ireland? Yeah, it’s mine. Platinum Member

    Mar 15, 2016
    Looking sweet!
    Manix2, Para3, Gayle Bradley 1/2, Native Chief*, Delica*, Endura*, Endela*, Stretch*, Domino, Dice, Lum Tanto, Navaja, Vollaton, Lil' Vollaton, Szabo
    *=will block lanyard hole
    **I'm not 100% sure of the length of screws needed for the above list. With some aftermarket clips, I can't use them because the new clip is thicker and the screws won't bite.
    I'm sure there are more.
     
  12. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    Dang that's perfect dude thank you for that list!!
     
    woodysone, Fullflat and ScooterG like this.
  13. ScooterG

    ScooterG You mean Ireland? Yeah, it’s mine. Platinum Member

    Mar 15, 2016
    You bet. Add on the Police 4*. Will also fit the Shaman if the user is ok with only using two screws and covering the lanyard hole.
     
  14. blueboost

    blueboost

    100
    Jul 26, 2006
    Those look excellent, nice attention to detail w/ bevelled screw holes, etc..
     
    Fullflat and razor-edge-knives like this.
  15. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    Thanks!!

    Just posting up a GAW on my instagram account for this proto clip, you guys make sure to enter!!!
     
    blueboost and Fullflat like this.
  16. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    Got the cards and sample bag in... What do you guys think?

    [​IMG]
     
    Fixall, duramax, BilboBaggins and 9 others like this.
  17. atdegs

    atdegs Gold Member Gold Member Basic Member

    387
    Jul 17, 2019
    Very nice!
     
    Sharp & Fiery likes this.
  18. Sharp & Fiery

    Sharp & Fiery Always Embellish Knifemaker / Craftsman / Service Provider

    May 14, 2012
    Hit ‘em, Josh!! Cant wait for these!
     
  19. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    They should be dropping this coming week at retailers!
     
    JJ_Colt45 and Sharp & Fiery like this.
  20. razor-edge-knives

    razor-edge-knives Moderator Moderator Knifemaker / Craftsman / Service Provider

    Apr 3, 2011
    [​IMG] [​IMG]
     

Share This Page