1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Y'all might think I'm crazy, but...

Discussion in 'Carothers Performance Knives' started by TRfromMT, Jan 15, 2019.

  1. marchone

    marchone Gold Member Gold Member

    Mar 13, 2013
    Yes. I am referring specifically to the Wustof Classic 4582/26 Chef's knife with the slab-sided scales. The discontinued Grand Prix line eliminated the hot spots but wasn't offered across the entire line. My go to kitchen workhorse was long the 4584/26 extra wide Chef's knife.
     
  2. TRfromMT

    TRfromMT Gold Member Gold Member

    Jan 4, 2016
    Not in the slightest! If we cannot geek out on our favorite brand, than that would be too bad.

    I am going into this knowing full well I will be altering the actual balance of the base knife, relative to the existing handles. I am also going into this with specific purposes to challenge myself, and alter (note I did not say "correct") the handle form at the back end to suit me a little more.

    The critique and different perspectives are as welcome as any sideline cheering. I'd love @Lorien's thoughts, and even @Nathan the Machinist's if he'd care to chime in.
     
    CataD, Hard Knocks and JJ_Colt45 like this.
  3. marchone

    marchone Gold Member Gold Member

    Mar 13, 2013
    Sorry if I went off script here too. I’m interested in what you will do. And also hope Nathan adds his expertise regarding balance goals.
     
    JJ_Colt45 likes this.
  4. JJ_Colt45

    JJ_Colt45 Gold Member Gold Member

    Sep 11, 2014
    I know from following through reading a good while before stepping into CPK knives .... that Nathan and Lorien both think 101 times and cut once ... and then tweak that a dozen more times until they hit what they set out to do ...

    and that's a big reason I got into CPKs and why I continue to support them ... well thought out knives that are made to actually use ...

    that being said I have also had the pleasure of handling and seeing the skill Tony has with handles ... and talking with him seeing he puts the same process in gear ... I look forward to following the thread and discussion.
     
    Mike157 likes this.
  5. Nathan the Machinist

    Nathan the Machinist KnifeMaker / Machinist / Evil Genius Moderator Knifemaker / Craftsman / Service Provider

    Feb 13, 2007

    Fighters usually balance near the guard. Due to the short blade length there was no need to keep weight in the butt of the tang to get achieve this. Being a utility knife it would also be appropriate to balance on the first finger. This knife balances at a point about midway between those two points.

    A problem with many classic ABS style fighters is they make the tip and the butt very light with distal taper and a stick tang and a weighted guard which makes the knife rotate quickly and feel really light and lively at their table but historically stabbing weapons were not like this and had more weight on the ends to resist deflection. You would often see a very stout point and a weighted pommel. This little knife, however, isn't really a full-on fighter and its moment of inertia is somewhere between an "ABS style knife" (which in my opinion are wrong) and a real historic weapon. It's a "tactical fixed blade" that can pry open a glove box (a pure fighter isn't intended to pry, but soldiers frequently do) defeat body armor, hammer through masonry and function as a utility fixed blade to open boxes and clean your fingernails. It just also happened to be designed to also function as a weapon. Some aspects of this design are a grip (contouring, guard and thumb ramp and handle flare) that fit while laid across the hand at an angle in order to project reach. The Shiv is specially contoured to sit straight and will align naturally with the arm (not jut out at an angle, try that with other knives) but there were some minor compromises to this grip on the UF to help it stay compact and lay flat which was important to the other collaborator, Jason. Still, the point location is intuitive without having to look.

    A key element to functioning as a modern tactical fixed blade is accommodating a reverse grip. If your thumb can't get around the end of the handle while held in a reverse grip it isn't a proper modern tactical fixed blade. It might be a very nice knife, but that wasn't what we were going for. That said I really like the design the OP put forward. It looks beautiful and I'll bet it feels great. But it won't be optimized for the function we envisioned for this knife, though it may be perfect for his goals, which is cool. :thumbsup:
     
    Last edited: Jan 15, 2019
  6. cvarner13

    cvarner13 Gold Member Gold Member

    145
    Apr 3, 2014
    https://www.bladeforums.com/threads/wip-machined-knife.1153472/
     
    Casinostocks and Mike Pierson like this.
  7. Mike Pierson

    Mike Pierson Proud Veteran Platinum Member

    956
    Dec 22, 2017
    Casinostocks likes this.
  8. marchone

    marchone Gold Member Gold Member

    Mar 13, 2013
    Thanks for that. Now I understand what you accomplished for your stated goals. :thumbsup:
     
  9. TRfromMT

    TRfromMT Gold Member Gold Member

    Jan 4, 2016
    Thanks @Nathan the Machinist

    One revised detail in my noodling sketch is that I've lopped off the top pointy corner for the thumb-over-the-end/reverse grip. I didn't have that in what I posted this AM.
     
    JJ_Colt45 and Mike157 like this.
  10. Lorien

    Lorien Moderator Moderator

    Dec 5, 2005
    Nate's post explains it all
     
    NUTRAMAC and Mike157 like this.
  11. TRfromMT

    TRfromMT Gold Member Gold Member

    Jan 4, 2016
    Started roughing things out today...

    20190202_121300~01.jpg 20190202_121107~01.jpg
     
    Oyster, Odog27, benchrest308 and 15 others like this.
  12. JJ_Colt45

    JJ_Colt45 Gold Member Gold Member

    Sep 11, 2014
    looks like a nicely figured piece ... I'm looking forward to seeing the finished product and what you think about it. :thumbsup:
     
    Oyster, Odog27, woodysone and 2 others like this.
  13. - SpyderMan -

    - SpyderMan - Gold Member Gold Member

    439
    Mar 28, 2015
  14. woodysone

    woodysone Gold Member Gold Member

    Nov 21, 2005
    Tony if this is any thing like the previous examples, I'm sure it will turn out great!
     
    stjones, JJ_Colt45 and TRfromMT like this.
  15. TRfromMT

    TRfromMT Gold Member Gold Member

    Jan 4, 2016
    Getting the filler piece fit...

    20190210_151805~01.jpg 20190210_151813~01.jpg
     
    Oyster, Lorien, jjweb and 14 others like this.
  16. TRfromMT

    TRfromMT Gold Member Gold Member

    Jan 4, 2016
    20160917_075250~01.jpg 20160909_123824~01.jpg


    I've done this before on several occasions. This time it's proving to be more complex...
     
    Oyster, jjweb, Odog27 and 4 others like this.
  17. JJ_Colt45

    JJ_Colt45 Gold Member Gold Member

    Sep 11, 2014
    still watching with interest ... I know how well your scales feel ... I have faith you'll find the right fit for it and you.
     
  18. TRfromMT

    TRfromMT Gold Member Gold Member

    Jan 4, 2016
    SQUIRREL!!

    20190215_180235~01.jpg
     
  19. Odog27

    Odog27 Gold Member Gold Member

    Nov 20, 2011
    stjones likes this.
  20. woodysone

    woodysone Gold Member Gold Member

    Nov 21, 2005
    Koa? For your FK2? Either way another fun project! What did the UF look like done? I’m sure it’s nice unless it ended in the scape pile?:eek:
     
    gusbuster, stjones and Odog27 like this.

Share This Page